Clamshell Manufacturers and Companies

Types of plastic materials used to create clamshells include:

• Polystyrene
• Polyvinyl Chloride (PVC)
• Polyester
• Various Other Thermoplastics and Polymers

Every plastic type offers different qualities.

Polystyrene

Hard, clear and inexpensive to produce. It is available in a variety of different forms, including solid sheet/molded plastic and foam. In addition to being clear, it can also be colored. It, however, is known to degrade very slowly and its use is regarded dubiously by environmental scientists.

Polyvinyl Chloride (PVC)

Known as an excellent insulator and resistor of the chemicals in substances like salts, acids, fats, bases, fuels, paint thinners and alcohols. It may be rigid or elastic. PVC degrades much better than polystyrene, but it still should be recycled rather than thrown away.

Polyester

Available in different types, with varying hardnesses and thermal and chemical stabilities. Also, polyester clamshells have refreshingly low toxicity levels and are recyclable.

There are a few types of clamshell packaging:

• Clamshell Trays
• Egg Crate Clamshells
• Tri-Fold Clamshells
• Custom Clamshells

Clamshell Trays

Used to package and display products simultaneously, like, for example, blueberries and other fruit, small tools like screws and pins and any number of other items.

Egg Crate Clamshell

Hold and divide products. They are named, of course, after egg cartons, though they also hold other rounded items, like golf balls.

Tri-Fold Clamshell

Finally, tri-fold clamshells are designed with a flat bottom so they can stand on display. These can be used to hold all sorts of products, like remote controls and other electronic goods, locks, handheld thermometers, sporting goods and more.

Custom Clamshell Packaging

In addition to these standard designs, clamshells are also available in a variety of custom configurations, and, of course, all clamshells are purchasable in different shapes and sizes. To find out more, reach out to an experienced clamshell and packaging manufacturer today.

Clamshells can be made using a variety of plastic forming processes, but the most common methods implemented on their behalf are thermoforming, pressure forming and vacuum forming. Thermoforming is a process by which plastic material is heated, stretched and cooled into parts.

Pressure forming and vacuum forming are both sub-processes of thermoforming and, therefore, they all begin the same way: First, plastic sheets are fed into heaters powered either by electricity, infrared radiation or natural gas, where they are warmed until they are elastic and malleable.

Once this step is complete, they are transferred to a forming station, which is where the deviations take place. If, at this point, the plastic is being pressure formed, pressurized air pushes it into a pressure-controlled mold. If, instead, it is being vacuum formed, the plastic will be enclosed in a mating mold and pressure box, where a vacuum will suction all of the air out and pull the plastic into the mold. Both methods are viable, but if a manufacturer is attempting to form a clamshell with greater precision or with more intricacies, pressure forming is the recommended choice, because it yields stronger adherence. Whatever a manufacturer’s choice, once the plastic has cooled, it is ejected from the mold using rigid reverse airflow.

At this point in the process, the clamshell exists either as two separate components or a single sheet. If the former is the case, manufacturers proceed by fusing the edges together to create a hinge, using either stamping, welding or heat treatments. If the latter, manufacturers simply fold the sheet to create a hinge, then heat seal it.

 

More Clamshells