Peristaltic Pump Manufacturers and Suppliers

Chemical, laboratory, medical, pharmaceutical, sewage treatment, painting, construction, packaging, agriculture, pulp and paper, water treatment, and engineering facilities make frequent use of peristaltic pumping systems. Like all metering equipment, these pumps are designed to introduce a consistent and cyclical flow of liquid into a process stream in order to maintain the homogeneity of the final product or solution.

Although specific liquid pumps vary, the general function is similar. A length of flexible tubing is wound around a circular track, which circumnavigates the pump head. One or more rollers are attached to the cylindrical center and used to compress the tubing at variable intervals. As the rollers move along, they displace the fluids within the tube, which are then exhausted through a release valve.

When the roller is removed, the tube expands to its original volume, creating a vacuum, which pulls more fluid into the device and the cycle repeats. Unlike many other types of pumps, including bellows pumps, diaphragm metering pumps, and piston metering pumps, the pumping mechanism of the peristaltic pump never makes contact with the fluids it dispenses. This makes its use preferred in applications where sterile liquids are required, such as medical, food, and beverage processing.

There are three common designs associated with the peristaltic pump:

Fixed Occlusion Pumps Have a set interval at which rollers are placed and a set pressure which they may apply. This allows for little variation in tube size and material but provides constant pressure and consistent performance. Spring Loaded Roller Pumps Allow for more variation in materials and flow rates. These offer constant stress operation but adjust to the different sized tubes that may be used for different manufacturing processes. 360 Degree Eccentric Pumps These mechanisms have a single over-sized roller that undergoes a complete revolution, compressing the tubing along the way. This particular design can increase flow per revolution up to 55% as compared to alternative designs of the same size. Though not always applicable, this option also reduces the wear and friction on the tubing, as it undergoes just one compression per revolution, while others may experience stress three or four times during a single operation.

The heat and wear resistance of the particular tubing chosen for a pumping application is very important. Extruded elastomeric materials, such as silicone rubber and fluoropolymer, are used, as they maintain a circular cross-section despite multiple compressions. Chemical compatibility between the hoses and the fluids they will process is also of great importance. Further considerations include inner and outer diameter, pump drive or power source, flow rate, number of rollers, and wall thickness.