Gas Filters Manufacturers and Suppliers

In the engine compartment or vehicle undercarriage, gasoline filters are employed along the fuel lines in transport, marine, shipping, petrochemical, automotive, and avionics industries. Manufacturing processes in these applications or simply the engine operation can produce byproducts such as metallic chips, dust, and emulsified water, which are easily introduced into a fuel supply. Environmental exposure also leaves gas susceptible to additional contaminants such as dirt and dust. Excess amounts of these impurities can be extremely damaging to an engine and, if left unfiltered, can lead to mechanical failure. In a gas filter, gas is run through a semi-permeable material that captures contaminants while allowing the fluid to pass. Liquid filters are essential to engine components that boost fuel efficiency while mitigating pump and engine wear as well as injector and hose clogging. Exhaust filters can also serve to lower vehicular emissions, which are strictly monitored in some industries and states. As with all liquid filtration systems, gas filters may become clogged or degrade over time. Proper maintenance and regular replacements ensure continued fuel optimization.

There are two main types of gas filters available. In-line products are positioned at the inlet of the fuel line. The gas is run through a bag filter, cartridge filter, wire mesh, membrane, or other semi-permeable barriers as soon as it enters the system. This ensures that contaminants are removed as the fuel flows into the engine. These assemblies are used in engines where the inlet, outlet, and filter elements are positioned in a relatively straight line. However, return line, or closed loop filters are positioned at the end of the system to catch those components generated by the operation of the engine or motor. After impurities are removed via similarly designed filters as inline systems, partially processed gas is returned to the system reservoir. Both filters can be used in low or high pressure applications. Low pressure filter housings such as those used in carbureted engines may be made of either metal or durable plastics, whereas high-pressure electronic fuel injection engine filters must be made of metal in order to withstand the tremendous amount of force behind the up and down motion of the engine's pump and pistons. Common metals include steel, aluminum, and stainless steel. The material construct of the filter media held or contained by that housing is far more diverse. Again, operating temperature and pressure should be considered, but materials such as activated carbon or clay, cellulose, ceramic, fiberglass, paper, nylon, polypropylene, and polyester are commonly used.